Customization is done with full homework, how to identify and purchase board veneers

Continuing from the introduction of the veneer in the previous article, how to identify and purchase?

1. The thickness of the veneer
The thicker the veneer, the better.

2. The beauty and decorativeness of the panel
It can be graded according to the clarity and arrangement of the board texture. If warping occurs or the board is soft and not upright, it is a low-quality baseboard.

3. Purchase according to service quality
Due to some characteristics of the panel itself, it takes a certain amount of time for quality problems to appear, so when purchasing, look at the brand's operating strength and after-sales service guarantee.

4. The thickness of the wood veneer
The common thickness of the wood veneer is 3.6mm, 5mm and 8mm. The 5mm wood veneer is relatively soft and suitable for wall shaping; the 8mm is relatively hard and can be directly put on the wall without primer.

4. Summary
1. The base material of the veneer is artificial board, which will release a certain amount of formaldehyde, so when purchasing, you must choose a manufacturer with quality assurance.
2. Technological wood veneer panels may fade due to light exposure, so try not to choose this type of panel in a space with good lighting.
3. You can choose particleboard (particleboard) as the board material. As long as it meets environmental protection standards, it can be considered as a product.